Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

Charlie Pila

WELDER
Ceske Budejovice

Summary

Competent in maintaining equipment and tools, as well as preparing surfaces, finishing products and repairing defects. Safety-oriented and hardworking professional with mathematics skills and advanced abilities in MIG welding.

Overview

12
12
years of professional experience
5
5
Certifications

Work History

Production MIG Welder

Schafer Menk
Plzen
01.2023 - Current
  • Prepared surfaces for welds through scraping, scoring and other techniques.
  • Assessed welds for specifications with work orders.
  • Measured parts to check compliance with design documents.
  • Avoided warping, shrinkage and distortion by carefully controlling welding processes.
  • Welded metal components in vertical, overhead and flat positions.
  • Monitored employees to encourage cost-effective and safe use of equipment and materials.
  • Combined knowledge of metallurgy, geometry and welding techniques to choose optimal equipment and techniques.
  • Closely monitored project and material layouts and specifications to effectively cut, contour and bevel metal and structural shapes.
  • Bolted, clamped and tack-welded parts to secure components prior to welding.
  • Operated soldering iron stations to solder connectors to cable assemblies.
  • Interpreted written assembly drawings and work instructions to properly complete tasks.
  • Leveraged micrometers, calipers and height gauges to prepare and record measurements.
  • Selected and operated shielded metal arc and gas metal arc welding equipment.
  • Monitored work area and equipment functionality and reported safety issues to management for effective resolution.
  • Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
  • Assembled and welded metal parts to create electronic circuit boards.
  • Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
  • Completed projects safely by closely monitoring conditions when lighting torches and using tools.
  • Employed mechanical presses, hand tools and heat guns to assemble and disassemble parts and products.
  • Recorded measurements and data on work orders and forms to schedule project execution.
  • Operated network analyzers and continuity testers to provide stakeholders with product quality information.
  • Maintained safety by wearing protective equipment, staying alert and following procedures.
  • Soldered joints by melting and applying solder along edges using soldering irons, gas torches or electric-ultrasonic equipment.
  • Inspected assemblies using microscopes and magnification aides to verify quality and durability.
  • Inspected pieces for defects, measured and checked with straightedges or templates for compliance with specifications.
  • Detected faulty operation of equipment and defective materials and promptly resolved issues.
  • Welded various connections with high-quality final results.
  • Reworked, repaired and adjusted cable assemblies and harnesses to meet safety standards.
  • Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
  • Studied inventories of available supplies, tools and materials to provide accurate quotes to clients.
  • Performed validation builds and engineering sample builds to test products.
  • Provided exceptional customer service by developing detailed plans for each project from start to finish.
  • Chipped away debris and thick crusts of rust, slag and other materials to ready surfaces for welding.

WELDER Fabricator

Stecomtra Steel Components S.R.O
Ostrava
07.2022 - 11.2022
  • Welded in flat, horizontal, vertical and overhead positions.
  • Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
  • Set up and operated shielded metal arc and gas metal arc welding equipment.
  • Inspected welds and checked critical measurements to meet specifications.
  • Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
  • Managed repair and maintenance schedule to organize shop and maintain equipment.
  • Assembled structural forms such as boiler parts and pressure vessels.
  • Chipped off excess weld, slag and spatter using hand tools.
  • Used MIG gun arc to melt and deposit metal from electrode to workpieces.
  • Observed hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
  • Conducted special welds with extremely low tolerances for industrial operations.
  • Fabricated shop parts directly from blueprints.
  • Identified issues, analyzed information and provided solutions to problems.
  • Demonstrated respect, friendliness and willingness to help wherever needed.
  • Proved successful working within tight deadlines and fast-paced atmosphere.
  • Adhered to social distancing protocols and wore mask or face shield.
  • Onboarded new temps by entering employee information into systems.
  • Worked with customers to understand needs and provide excellent service.
  • Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
  • Improved operations through consistent hard work and dedication.
  • Monitored company inventory to keep stock levels and databases updated.
  • Resolved conflicts and negotiated mutually beneficial agreements between parties.
  • Worked within applicable standards, policies and regulatory guidelines to promote safe working environment.
  • Developed and maintained courteous and effective working relationships.
  • Worked flexible hours across night, weekend and holiday shifts.
  • Used coordination and planning skills to achieve results according to schedule.
  • Worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.

Welder - Locksmith

Keb -Age, Spol S.r.o
České Krumlov
04.2020 - 05.2022
  • Set up and operated shielded metal arc and gas metal arc welding equipment.
  • Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
  • Welded in flat, horizontal, vertical and overhead positions.
  • Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and shielded metal arc equipment.
  • Prepared welding equipment to perform advanced welding work.
  • Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
  • Operated robotic cells machinery.
  • Minimized warping using good fitting, burning and welding techniques.
  • Used MIG gun arc to melt and deposit metal from electrode to workpieces.
  • Observed hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
  • Managed repair and maintenance schedule to organize shop and maintain equipment.
  • Maintained correct arc length and movement speed to form specified fusion depth and bead.
  • Inspected welds and checked critical measurements to meet specifications.
  • Conducted special welds with extremely low tolerances for industrial operations.
  • Fabricated shop parts directly from blueprints.
  • Chipped off excess weld, slag and spatter using hand tools.
  • Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
  • Assembled structural forms such as boiler parts and pressure vessels.
  • Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
  • Salvaged and rebuilt parts to achieve cost savings and reduce waste.

WELDER & Machine Operator

Mars Svratka A.s
Svratka Libusina
06.2019 - 03.2020
  • Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
  • Welded in flat, horizontal, vertical and overhead positions.
  • Set up and operated shielded metal arc and gas metal arc welding equipment.
  • Observed hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
  • Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
  • Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and shielded metal arc equipment.
  • Maintained correct arc length and movement speed to form specified fusion depth and bead.
  • Salvaged and rebuilt parts to achieve cost savings and reduce waste.
  • Chipped off excess weld, slag and spatter using hand tools.
  • Managed repair and maintenance schedule to organize shop and maintain equipment.
  • Conducted special welds with extremely low tolerances for industrial operations.
  • Minimized warping using good fitting, burning and welding techniques.
  • Used MIG gun arc to melt and deposit metal from electrode to workpieces.
  • Operated robotic cells machinery.
  • Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
  • Fabricated shop parts directly from blueprints.
  • Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
  • Inspected welds and checked critical measurements to meet specifications.
  • Assembled structural forms such as boiler parts and pressure vessels.
  • Prepared welding equipment to perform advanced welding work.

6g ,6gr Welder Rig & Wind Turbines Project

Lamprell Energy LTD.
Sharjah
11.2015 - 06.2018
  • Offered friendly and efficient service to customers, handled challenging situations with ease.
  • Maintained energy and enthusiasm in fast-paced environment.
  • Collaborated with team members to achieve target results.
  • Proved successful working within tight deadlines and fast-paced atmosphere.
  • Worked within applicable standards, policies and regulatory guidelines to promote safe working environment.
  • Used Microsoft Word and other software tools to create documents and other communications.
  • Identified issues, analyzed information and provided solutions to problems.
  • Actively listened to customers, handled concerns quickly and escalated major issues to supervisor.
  • Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
  • Led projects and analyzed data to identify opportunities for improvement.
  • Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
  • Carried out day-to-day duties accurately and efficiently.
  • Managed team of employees, overseeing hiring, training and professional growth of employees.
  • Used critical thinking to break down problems, evaluate solutions and make decisions.
  • Delivered services to customer locations within specific timeframes.
  • Monitored company inventory to keep stock levels and databases updated.
  • Worked with customers to understand needs and provide excellent service.
  • Maintained excellent attendance record, consistently arriving to work on time.
  • Created plans and communicated deadlines to complete projects on time.
  • Developed and implemented performance improvement strategies and plans to promote continuous improvement.
  • Adhered to social distancing protocols and wore mask or face shield.
  • Learned new skills and applied to daily tasks to improve efficiency and productivity.

Shipbuilders

KAEDE KOGYO Co.
Hiroshima
11.2011 - 10.2014
  • Improved operations through consistent hard work and dedication.
  • Successfully maintained clean, valid driver's license and access to reliable transportation.
  • Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
  • Drove operational improvements which resulted in savings and improved profit margins.
  • Learned new skills and applied to daily tasks to improve efficiency and productivity.
  • Developed and maintained courteous and effective working relationships.
  • Carried out day-to-day duties accurately and efficiently.
  • Prepared variety of different written communications, reports and documents.
  • Participated in continuous improvement by generating suggestions, engaging in problem-solving activities to support teamwork.
  • Received and processed stock into inventory management system.
  • Developed and implemented performance improvement strategies and plans to promote continuous improvement.
  • Led projects and analyzed data to identify opportunities for improvement.
  • Actively listened to customers, handled concerns quickly and escalated major issues to supervisor.
  • Used coordination and planning skills to achieve results according to schedule.
  • Worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
  • Demonstrated respect, friendliness and willingness to help wherever needed.
  • Managed team of employees, overseeing hiring, training and professional growth of employees.
  • Identified issues, analyzed information and provided solutions to problems.
  • Worked flexible hours across night, weekend and holiday shifts.
  • Conducted research, gathered information from multiple sources and presented results.

Trailer Builder

Al- Mussallam Car Body Maker
Dammam
03.2007 - 02.2010
  • Assessed welds for specifications with work orders.
  • Prepared surfaces for welds through scraping, scoring and other techniques.
  • Measured parts to check compliance with design documents.
  • Completed projects safely by closely monitoring conditions when lighting torches and using tools.
  • Welded metal components in vertical, overhead and flat positions.
  • Inspected assemblies using microscopes and magnification aides to verify quality and durability.
  • Operated network analyzers and continuity testers to provide stakeholders with product quality information.
  • Avoided warping, shrinkage and distortion by carefully controlling welding processes.
  • Closely monitored project and material layouts and specifications to effectively cut, contour and bevel metal and structural shapes.
  • Soldered joints by melting and applying solder along edges using soldering irons, gas torches or electric-ultrasonic equipment.
  • Studied inventories of available supplies, tools and materials to provide accurate quotes to clients.
  • Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
  • Welded various connections with high-quality final results.
  • Combined knowledge of metallurgy, geometry and welding techniques to choose optimal equipment and techniques.
  • Interpreted written assembly drawings and work instructions to properly complete tasks.
  • Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
  • Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
  • Employed mechanical presses, hand tools and heat guns to assemble and disassemble parts and products.
  • Inspected pieces for defects, measured and checked with straightedges or templates for compliance with specifications.
  • Performed validation builds and engineering sample builds to test products.

Education

Czech Welding Society ANB
Plzen Czech Republic

Bacungan National High School
Leon B. Postigo Zamboanga Del Norte

TESTDA ( FILJAP Skill Training Academy
Sampaloc ,manila Philippines

Skills

Fabrication

undefined

Certification

CWS, Mig welding certificate European federation welding society certificate

Timeline

Production MIG Welder

Schafer Menk
01.2023 - Current

WELDER Fabricator

Stecomtra Steel Components S.R.O
07.2022 - 11.2022

Welder - Locksmith

Keb -Age, Spol S.r.o
04.2020 - 05.2022

WELDER & Machine Operator

Mars Svratka A.s
06.2019 - 03.2020

6g ,6gr Welder Rig & Wind Turbines Project

Lamprell Energy LTD.
11.2015 - 06.2018

Shipbuilders

KAEDE KOGYO Co.
11.2011 - 10.2014

Trailer Builder

Al- Mussallam Car Body Maker
03.2007 - 02.2010

Czech Welding Society ANB

Bacungan National High School

TESTDA ( FILJAP Skill Training Academy

Similar Profiles

CREATE PROFILE
Charlie Pila WELDER